ORIGINS
The standard Model S & Model X front lower suspension arms, fitted from factory with soft rubber bushings are notoriously prone to wear and often end up requiring replacement. Given the enormous power, weight and grip of all Tesla Model S & Model X, it’s little wonder that wear is accelerated so quickly as the car’s mileage increases.
There’s a reason a better solution has not existed until now. These arms are extremely expensive to develop because replacement requires a complete new arm with multiple new bushings to be preinstalled. After many years testing at the Nurburgring, at Pikes Peak and daily driven on the road, we’ve made the necessary investment to bring a comprehensive solution that is easy to install and has a revised approach to all bushings in the arms.
The Unplugged Performance Front Lower Compliance Fore and Lateral Aft Control Arms are full OEM-spec control arm replacements that feature upgraded spherical bushings throughout, already mounted in them for easy and low-cost installation.Â
These meticulously engineered components are essential for anyone with worn bushings or for those looking for more precision out of their driving experience. These front lower arms feature aircraft-grade spherical bushings (sealed ball joints) and high-quality rubber bushings pressed into OEM-quality aluminum arms to enhance precision where it matters most, whilst minimising vibrations and noise. These arms and bushings were developed for everyday road use and were proven to withstand the intense conditions of extreme track use and even Pikes Peak Hill Climb in our race car.
Improve driving precision. Upgrading from the OEM rubber bushings to sealed spherical bushings provides laser-like precision in the steering and handling feel of the Model S & X. These arms and spherical bushing eliminate any numb feeling in the steering. Even worse, worn bushings can result in sloppy steering and handling. Whether you’re engaging in manual driving or using self-driving modes, precise steering and chassis response reduces the need for constant corrections, delivering a more seamless and efficient driving experience. The result is less fatigue and smoother travel, meaning there is more comfort and more stability. Regardless of whether you’re behind the wheel or enjoying the ride as a passenger, you’ll appreciate the enhanced experience.
Replace your worn out bushings. Tesla’s factory bushings utilize a soft rubber that we’ve found wear out in as little as 30,000-50,000 miles causing annoying knocking and creaking noises as well as slop and play in the steering. Excessive wear of the bushings can lead to unintended wheel movements with even the slightest forces, causing hazardous driving conditions and unpredictable handling. It can also result in excessive tyre wear. The Unplugged Performance Front Lower Compliance Fore and Lateral Aft Control Arms with Spherical Bushings solve this issue as a quick and easy full arm replacement. Our arms are meticulously crafted with cast aluminium cores and shaped through precision assembly to ensure a heightened driving experience.
We’ve simplified and upgraded the solution for you. Replacement options until now have typically been limited to a direct replacement with exactly the same hardware – ultimately resulting in the same outcome. Alternatively, some aftermarket solutions may address the replacement inner bushings, however that does not address the outer bushings or ball bushings. Additionally, pressing in bushings can be a very expensive installation.Â
We offer a full arm replacement that replaces and upgrades every associated bushing, including the ball joints which must be inserted during the arm’s casting process. All this extra development is to give you a simplified and thoroughly-engineered solution. Another benefit is that this arm can easily be installed in the comfort of your own garage or driveway if you choose to. Alternatively, it requires significantly less labour hours for shops to install, and thus less installation costs for you.
Improve premature and uneven tyre wear. With a spherical bushing your Tesla can be aligned with unparalleled accuracy. Your tyres will follow your intended path by eliminating micro fore and aft bushing maneuverability mitigating unwanted tear wear.
The Front Lower Compliance Fore Arms are located at the front lower suspension and connect the hub to the subframe at the most forward position in the front suspension. They incorporate 1 new spherical bushing or bearing and 1 new spherical ball joint and act as the factory caster adjuster using an eccentric bolt at the subframe mounting point.
THE BEST IN THE INDUSTRY:Â ENGINEERING AND QUALITY YOU CAN SEE AND FEEL
The Front Lower Lateral Aft Arms are located at the front lower suspension and connect the hub to the subframe while also being the lower anchoring point for the strut assembly. They incorporate 2 new spherical bushings or bearings and 1 new ball joint and it also acts as the factory camber adjuster using an eccentric bolt at the subframe mounting point.
Note:Â A proper alignment is highly recommended after installing these arms and bushings
Replaces OEM part #’s:
TSLA-1420341-00-C – Model X Front Lower Compliance Fore Suspension Arm Assembly, Left
TSLA-1420346-00-C – Model X Front Lower Compliance Fore Suspension Arm Assembly, Right
TSLA-1027351-00-E – Model X Front Lower Lateral Aft Suspension Arm Assembly, Right and Left
Parts Included in Front Lower Compliance Fore Suspension Arms:
(2) Front lower fore suspension arms with 2 spherical bushings and 1 spherical ball joint pressed in
(2) OEM Tesla nardlock-style nut
 Parts Included in Front Lower Lateral Aft Suspension Arms:
(2) Front lower aft suspension arms with 1 spherical bushing and 1 spherical ball joint pressed in
(2) OEM Tesla nardlock-style nut
